Home
About Us
Contact Us
Home
/
Cartridge Heaters
We offers the following types of Cartridge Heaters
HI Series - High Watt Density Cartridge Heater
HJ or HK Series - High Watt Density Cartridge Heater with Thermocouple
HI Series - 4mm High Watt Density Cartridge Heater
LI Series - Medium Watt Density Cartridge Heater
NP Series - Low Watt Density Cartridge Heater
HI Series - High Watt Density Cartridge Heater
Diameters Available:
Inch
1/8"
1/4"
3/8"
5/16"
1/2"
5/8"
11/16"
3/4"
1"
Metric
3.17
6.5
8
9.5
10
12
12.5
15
16
18
19
20
25
Other Diameters Available - Please Consult Factory for Others
All HI Type Heating Elements Are Centerless Ground as Standard
Provide +/-.0008" diameter tolerance
Allows better heat transfer resulting in longer life
Except Ø 1/8" HI heaters which are 3.17±.15mm
Standard Construction Details:
Gas tight welded tip
Lead Connection Option: Crimped or Swaged leads
Lead and type of connection leads, 10" Fiberglass Standard
Wire Options
Type
Usable Temperature
Fiberglass (Stock)
250 C
teflon
260 C
Silicone
260 C
Silicone
260 C
Silicone Cable (2 or 3 Wire)
260 C
High Temp Fiberglass
500 C
(Swaged Teflon wire standard on Ø 1/8" heaters)
Minimum length of 1", Maximum length to 105" (8 3/4 Feet)
Maximum Wattage depends on heater's size and application
UL/CSA/CE Approved Rating on select styles
Options:
Diameter (Special Diameter Tolerance if required)
Length (
Special Length Tolerance if required)
Lead connection option and lead protection
Lead length and type (see above chart)
Voltage and Wattage
Specialized Wattage Distribution to provide more uniform heat pattern
Lead exit styles (right angle block, right angle elbow, and right angle exit)
Heater tip flat bottom
Special Stamping - Labeling Needs
See Type HJ / HK for units with built-in thermocouple
Short Wave IR Lamps
|
Ceramic Infrared Heaters
|
Incandescent Lamps
|
Thermo Regulators
|
Coil Heaters
|
Cartridge Heaters
|
Thermocouples
|
Plastics Machinery & Embossing Rollers
Web Site Design
by : Enablingbiz