HLP 3000 DS IR Paint Dryer Distance Sensor

 

The 3000 DS model has three 1kW Glare control lamps, fitted into individual cassettes.

 

The unit is equipped with an ultrasonic distance indicator allowing it to be correctly positioned.

 

Lamps emit shortwave infrared heat ideal for optimizing drying of water based paints.

 

This flexible system allows the cassettes to be adjusted and locked into position around the contours of the vehicle body, ensuring maximum area coverage.

 

Height adjustment is made using the high performance locking gas strut, offering a near weightless movement to the cassette support arm.

 

 

 

Area coverage : 800mm x 1000mm

 

Minimum operating distance : 500mm

 

Maximum vertical curing height : 2030mm

 

Maximum horizontal curing height : 1800mm

 

Electrical : 220/240V, 3kW, 50Hz, single phase, 12.5 Amps.

 

                   380/415V, 3kW, 50Hz, 3 phase, 4.25 Amps/phase

 

1kW high output glare control shortwave lamps fitted to each cassette, 500mm long

 

Twin 30 minute programmable timers on both the flash and bake settings.

 

Power settable on both flash and bake cycle.

 

Digital indicator with safety cut off if the unit is moved too close.

 

Robust steel constructed frame fitted with rear wheel locking castors.

 

Maintenance free cassettes with no fan or filter changes.

 

Individually switched cassettes.

 

Horizontal or vertical cassette operation.

 

Long lamp life with an average of 6000 hours.

 

 

 

Filler : 4-6 minutes

 

Primer : 6-8 minutes

 

Top coat : 10-12 minutes