HLP 2000 IR Paint Dryer

HLP 2000
The 2000 model is the ideal heater to compliment any full sized drying system. Designed to be used with our existing light weight stand, with or without the HLP 30 minute timer. It provides the ideal additional spot drying unit for any number of small jobs.
The 500mm long 1kW 'Glare Control' short wave infrared lamp fitted into our 580mm cassette can easily cover horizontal or vertical repair. It offers quick and simple adjustment up and down the full length of the 1.8m stand. So, any bumper or door job can be covered easily and quickly.
This model is intended for us on small to medium spot repairs and drying jobs e.g. engine drying, stripe removal, bumper scruffs, filler drying, stone chip repairs and preheating prior to spraying.

Dimensions: Fitting - 580mm x 160mm x 85mm
Stand - 500mm x 500mm x 1800mm (height)
Area covered : 800mm x 300mm
Minimum operating distance : 500mm
Electrical : 220/240V, 1kW, 50Hz, 4.25 Amps.
Lamp : 1kW short wave glare control lamp, 500mm long

Wide angle reflector

Built in isolating switch
3 metres flexible cable
Sturdy 6 ft. Chrome plated stand
Full height 'slide and lock' cassettes
Horizontal and vertical operation
Timer option
HLP 2000S : Standard model with stand
HLP 2000T : Twin cassettes with one stand
HLPT : 0-30 minute timer for above models